We offer a wide variety of stainless steel pipe to fit your application:

All Sizes  |   All Schedules  |  All Grades

300 series – 304, 304/304L, 304H, 309, 309H, 310, 310H, 316, 316/316L, 316H, 317L, 321, 321/321L, 347, 347H

400 series – 410, 431

Duplex Stainless – 2205, 2304, 2507 

Nickel Alloys – Carpenter 20, Nickel 200, Monel 400, Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel X750, Incoloy 800, Incoloy 825, Hastelloy C22, Hastelloy C276, Hastelloy-X, AL6XN 

Note: Additional grades available upon request. 

ASTM A312 – This specification covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309Cb, TP309S, TP310Cb, TP310S, TP316, TP321, TP347, and TP348, and are intended for service at temperatures where creep and stress rupture properties are important.

ASTM A335 – This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.

ASTM A814 – This specification covers two classes of flanged and cold-bending quality cold-worked straight-seam single or double welded austenitic steel pipe intended for high-temperature and general corrosive services. Grades TP304H, TP304N, TP316H, TP316N, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP316, TP321, TP347, and TP348, and are intended for high-temperature service.

ASTM B165 – This specification covers nickel-copper alloy UNS N04400 in the form of cold-worked seamless pipe and tube. The material shall conform to the composition limits specified. Tension test, hydrostatic test, nondestructive electric test, and rounding method shall be done in accordance to the specified requirements.

ASTM B167 – This specification covers nickel-chromium-aluminum alloys (UNS N06699), nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),3 nickel-chromium-cobalt-molybdenum alloy (UNS N06617), nickel-iron-chromium-tungsten alloy (UNS N06674), and nickel-chromium-molybdenum-copper alloy (UNS N06235) in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications.

ASTM B619 – This specification covers welded pipe of nickel and nickel-cobalt alloys (UNS N10001; UNS N10242; UNS N10665; UNS N12160; UNS N10624; UNS N10629; UNS N10675; UNS N10276; UNS N06455; UNS N06007; UNS N06975; UNS N08320; UNS N06002; UNS N06022; UNS N06035; UNS N06044; UNS N06058; UNS N06059; UNS N06200; UNS N06235; UNS N10362; UNS N06985; UNS N06030; UNS R30556; UNS N08031; UNS N08034; UNS N06230; UNS N06686; UNS N06210; and UNS R20033).

ASTM B622 – This specification covers seamless pipe and tube of nickel and nickel-cobalt alloys (UNS N10001, UNS N10242, UNS N10665, UNS N12160, UNS N10675, UNS N10276, UNS N06455, UNS N06007, UNS N08320, UNS N06975, UNS N06002, UNS N06985, UNS N06022, UNS N06035, UNS N06044, UNS N08135, UNS N06255, UNS N06058, UNS N06059, UNS N06200, UNS N10362, UNS N06030, UNS N08031, UNS N08034, UNS R30556, UNS N08535, UNS N06250, UNS N06060, UNS N06230, UNS N06686, UNS N10629, UNS N06210, UNS N10624, and UNS R20033).

Note: This is summarized information from ASME Specifications current as of 2020-01. For additional information on the ASTM Specifications please visit: astm.org 

Additional Services offered:

• ID and OD Pipe Polishing –

#3 Finish   30-45RMS    25-40RA
#4 Finish   18-30RMS    15-25RA
#6 Finish   14-20RMS    12-18RA
#7 Finish   5-9RMS         4-8RA
#8 Finish   1-5RMS         0-4RA

• Honing, Turning, and Centerless Grinding options available. 

• Cut-to-length

• Beveling, Grooving, and other end-prep options.

• PMI Testings (Positive Material Identification)

• UT Testing (Ultrasonic Testing)- Non-Destructive Testing

• ASME and Other Testing as needed.

• Material Test Reports

Note: Not all services are available for all grades, sizes, and schedules. Please check with our staff of experts for more information.